sin()
PROVEN

TEREX · SELF-ERECTING

CRN-019

TEREX SELF-ERECTING

CBR and CSE. Unfold, lift, fold. CSA Z248 still applies. Now on raimondi.com. Lift to the serial chart for this jib position and this ballast.

DOCUMENT
GOSPEL-CRN-019
REVISION
01 CURRENT
EFFECTIVE
2026-09-01
OWNER
GOSPEL Safety
APPROVED BY
GOSPEL
REVIEW
2027-09-01

Lift to the serial chart in the cab — this jib, this reeving, this mast, this ballast. The files below are published on raimondi.com. Terex Tower Cranes and Self-Erecting Cranes now sit under Raimondi. Data sheets are the Downloads on each product page. Serial manuals live in the cab. T-Link, T-Torque and Terex Power Plus where fitted.

TEREX PRODUCT PAGE →

PUBLISHED RANGE

CSE 40

4.4 t (4.85 USt) max. 40 m (131 ft) jib. 1.15 t (1.27 USt) at max radius with Terex Power Plus. Hook height 25.6 m to 32.2 m. Swing radius 2.8 m. TPP and Power Match.

CSE 32

4.4 t max. 32 m jib. 1.15 t at max radius on the published listing.

CBR 32 PLUS / CBR 40H

4 t max. 32 m or 40 m jib. 1 t at max radius.

CBR 21H / 24 PLUS / 28 PLUS

1.6 t / 21 m, 2 t / 24 m, 2.5 t / 28 m. Match the plate to that page.

LOAD CHARTS + DATA SHEETS

CSE 40 — PRODUCT PAGE + DATA SHEET →

Metric sheet and CSE series brochure in Downloads.

CSE 32 — PRODUCT PAGE →

CBR 32 PLUS — PRODUCT PAGE + DATA SHEET →

Metric and imperial sheets.

CBR 40H — PRODUCT PAGE + DATA SHEET →

SELF-ERECTING RANGE →

MANUALS + MAINTENANCE

TEREX SELF-ERECTING ON RAIMONDI →

Unfold / fold sequence, ballast, outriggers, remote, lubrication. TPP and Power Match are in the serial manual — follow it.

INSPECT

  • Chassis, outriggers, jacks, pads, slope within the OEM limit
  • Ballast complete and locked as the chart for this jib
  • Unfold complete. Transport locks off. Pins and keepers in
  • Jib position (horizontal / raised / short) matches the chart in use
  • Remote or cab: function, E-stop, Terex Power Plus setting, no uncleared alarm
  • Hoist rope, hook, trolley or luffed jib as fitted, limits
  • Power: voltage, phase, earthing as the plate
  • Weathervane / out-of-service as the OEM for this wind

MAINTAIN

  • Unfold / fold mechanisms, pins, hydraulic rams where fitted
  • Outrigger beams, jacks, holding valves
  • Hoist, slew, trolley — OEM lubrication
  • Electrical panel, remote batteries, cables
  • Wire rope and hook block
  • Transport axles and locks when the crane will travel

GOSPEL FORMS

SELF-ERECT INSPECTION — GOSPEL-FRM-029 →

FILL SELF-ERECT INSPECTION →

TOWER PRE-USE — GOSPEL-FRM-027 →

TOWER WEEKLY MAINTENANCE — GOSPEL-FRM-030 →

TOWER MONTHLY MAINTENANCE — GOSPEL-FRM-031 →

PROVENsin(). Current version on this site.