sin()
PROVEN

TEREX · LUFFING JIB

CRN-018

TEREX CTL

CTL rope luffers and the CTLH 192-12 hydraulic. Now on raimondi.com. Lift to the serial chart in the cab.

DOCUMENT
GOSPEL-CRN-018
REVISION
01 CURRENT
EFFECTIVE
2026-09-01
OWNER
GOSPEL Safety
APPROVED BY
GOSPEL
REVIEW
2027-09-01

Lift to the serial chart in the cab — this jib, this reeving, this mast, this ballast. The files below are published on raimondi.com. Terex Tower Cranes and Self-Erecting Cranes now sit under Raimondi. Data sheets are the Downloads on each product page. Serial manuals live in the cab. T-Link, T-Torque and Terex Power Plus where fitted.

TEREX PRODUCT PAGE →

PUBLISHED RANGE

CTLH 192-12

Hydraulic. 12 t (26,455 lb) max. 55 m (180 ft) jib. 2.35 t (5,181 lb) at max radius. 67 kW hoist. I–II–III falls.

CTL 180-16

Rope luffer. 16 t max. 55 m jib. 2 t at max radius.

CTL 712-45

45 t max. 70 m jib. 5.8 t at max radius. T-Line auto-levelling. T-Torque. Ground-level assembly on the published sheet.

Range

CTL 140-10 through CTL 1600-66 on the Raimondi CTL listing. Match the plate to that page.

LOAD CHARTS + DATA SHEETS

CTLH 192-12 — PRODUCT PAGE + DATA SHEET →

Hydraulic luffer. Metric sheet and brochure in Downloads.

CTL 180-16 — PRODUCT PAGE + DATA SHEET →

CTL 712-45 — PRODUCT PAGE + DATA SHEET →

Metric and imperial sheets.

CTL SERIES RANGE →

MANUALS + MAINTENANCE

T-LINK →

Rope CTL: luffing winch, luffing rope, cathead. Hydraulic CTLH: cylinder and power pack. The serial manual names the interval.

T-TORQUE →

RAIMONDI / TEREX TOWER →

INSPECT

  • Which luffer: hydraulic CTLH or rope CTL. Inspection follows that machine
  • Serial, jib length, reeving, ballast match the chart in the cab
  • Jib angle against the chart for this radius and this reeving
  • T-Line auto-levelling where fitted — hook height holds as the jib moves
  • Hydraulic CTLH: cylinder, hoses, power pack, leaks, level
  • Rope CTL: luffing rope, winch, cathead, dead ends
  • T-Torque slew. Overload. Anemometer
  • Out-of-service jib position for this wind

MAINTAIN

  • Luffing system on the OEM interval for this serial
  • Hydraulic CTLH: oil, filters, cylinder glands — OEM interval
  • Hoist and slew as the lubrication chart
  • Wire rope: hoist and, on rope luffers, the luffing line

GOSPEL FORMS

LUFFING JIB INSPECTION — GOSPEL-FRM-028 →

FILL LUFFING JIB INSPECTION →

TOWER PRE-USE — GOSPEL-FRM-027 →

TOWER WEEKLY MAINTENANCE — GOSPEL-FRM-030 →

TOWER MONTHLY MAINTENANCE — GOSPEL-FRM-031 →

PROVENsin(). Current version on this site.