sin()
PROVEN

POTAIN · SELF-ERECTING

CRN-004

POTAIN SELF-ERECTING

Hup, Igo and Igo T. Unfold, lift, fold. CSA Z248 still applies. Lift to the serial chart for this jib position and this ballast.

DOCUMENT
GOSPEL-CRN-004
REVISION
01 CURRENT
EFFECTIVE
2026-09-01
OWNER
GOSPEL Safety
APPROVED BY
GOSPEL
REVIEW
2027-09-01

Lift to the serial chart in the cab — this jib, this reeving, this mast, this ballast. The files below are Manitowoc published range sheets. Operator, maintenance and lubrication manuals for this serial live in the cab and on Manitowoc Crane Care.

POTAIN PRODUCT PAGE →

PUBLISHED RANGE

Hup 32-27

4 t (4.4 USt). 32 m (105 ft) jib. 1 t (1.1 USt) at max radius. 27 m (89 ft) hook height on base, up to about 40 m with raised jib. Multiple mast and jib configurations.

Hup 40-30

4 t (4.4 USt). 40 m (131 ft) jib. 1 t (1.1 USt) at max radius. 30 m (98 ft) hook height on base.

Igo T 85

Trolley self-erect with a tower. Published product guide and ASME / metric data sheets. Confirm jib and ballast on the plate.

Igo T 130

Larger Igo T. ASME and metric data sheets on Manitowoc. 8 t class on the published range leaflet.

Igo 50

Folding Igo. Metric data sheet and product guide. Confirm the imperial chart in the cab for North American machines.

LOAD CHARTS + DATA SHEETS

HUP 32-27 — ASME LOAD CHART →

HUP 32-27 — METRIC DATA SHEET →

HUP 32-27 — PRODUCT PAGE →

HUP 40-30 — ASME LOAD CHART →

HUP 40-30 — PRODUCT PAGE →

IGO T 85 A — ASME LOAD CHART →

IGO T 85 A — PRODUCT GUIDE →

IGO T 85 — PRODUCT PAGE →

IGO T 130 — ASME LOAD CHART →

IGO T 130 — PRODUCT PAGE →

IGO 50 — METRIC DATA SHEET →

IGO 50 — PRODUCT GUIDE →

POTAIN SELF-ERECTING RANGE →

MANUALS + MAINTENANCE

MANITOWOC MANUALS — BRAND POTAIN →

Unfold / fold sequence, ballast, outriggers, remote, lubrication. Smart Set-up on Hup is in the serial manual — follow it.

INSPECT

  • Chassis, outriggers, jacks, pads, slope within the OEM limit
  • Ballast complete and locked as the chart for this jib
  • Unfold complete. Transport locks off. Pins and keepers in
  • Jib position (horizontal / raised / short) matches the chart in use
  • Remote or cab: function, E-stop, no uncleared alarm
  • Hoist rope, hook, trolley or luffing as fitted, limits
  • Power: voltage, phase, earthing as the plate
  • Weathervane / out-of-service as the OEM for this wind

MAINTAIN

  • Unfold / fold mechanisms, pins, hydraulic rams where fitted
  • Outrigger beams, jacks, holding valves
  • Hoist, slew, trolley — OEM lubrication
  • Electrical panel, remote batteries, cables
  • Wire rope and hook block
  • Transport axles and locks when the crane will travel

GOSPEL FORMS

SELF-ERECT INSPECTION — GOSPEL-FRM-029 →

FILL SELF-ERECT INSPECTION →

TOWER PRE-USE — GOSPEL-FRM-027 →

TOWER WEEKLY MAINTENANCE — GOSPEL-FRM-030 →

TOWER MONTHLY MAINTENANCE — GOSPEL-FRM-031 →

PROVENsin(). Current version on this site.