RAIMONDI · LUFFING JIB
RAIMONDI LUFFING JIB
LR rope luffers and the LRH174 hydraulic. Same job: a jib that luffs so the crane can work tight to the building. Lift to the serial chart in the cab.
- DOCUMENT
- GOSPEL-CRN-016
- REVISION
- 01 CURRENT
- EFFECTIVE
- 2026-09-01
- OWNER
- GOSPEL Safety
- APPROVED BY
- GOSPEL
- REVIEW
- 2027-09-01
Lift to the serial chart in the cab — this jib, this reeving, this mast, this ballast. The files below are published on raimondi.com. Terex Tower Cranes and Self-Erecting Cranes now sit under Raimondi. Data sheets are the Downloads on each product page. Serial manuals live in the cab. T-Link, T-Torque and Terex Power Plus where fitted.
PUBLISHED RANGE
LRH174
Hydraulic. 10 t max. 50 m jib. 2.25 t at max radius in Ultra-lift, two falls. Out-of-service about 10 m. Jib to 85° in about 1.8 minutes. No A-frame — jib and hoist assembled at ground level.
LR213
Rope luffer. 14 t max. 55 m jib. 73.5 kW hoist.
LR273
18 t max. 60 m jib. 67/86 kW hoist.
LR372 / LR60
LR372: 20 t, 60 m, 110 kW. LR60: 5 t, 36 m, 22 kW. Match the plate to that page.
LOAD CHARTS + DATA SHEETS
LRH174 — PRODUCT PAGE + DATA SHEET →
Hydraulic luffer. Downloads on the page.
MANUALS + MAINTENANCE
Rope LR: luffing rope, cathead, luffing winch. Hydraulic LRH: rams and tank. The serial manual names the interval.
INSPECT
- Which luffer: hydraulic LRH or rope LR. Inspection follows that machine
- Serial, jib length, reeving, ballast match the chart in the cab
- Jib angle against the chart for this radius and this reeving
- Hydraulic LRH: cylinder, hoses, power pack, leaks, level. Near-vertical clearance
- Rope LR: luffing rope, winch, cathead, dead ends
- Hoist rope, hook, limits, overload, anemometer
- Slew, weathervaning, mast, ties
- Out-of-service jib position for this wind
MAINTAIN
- Luffing system on the OEM interval for this serial
- Hydraulic LRH: oil, filters, cylinder glands — OEM interval
- Hoist and slew as the lubrication chart
- Wire rope: hoist and, on rope luffers, the luffing line
GOSPEL FORMS
LUFFING JIB INSPECTION — GOSPEL-FRM-028 →
TOWER PRE-USE — GOSPEL-FRM-027 →
PROVENsin(). Current version on this site.