PECCO · LUFFING JIB
PECCO SN
Rope luffing jib. Short tail-swing. SN 160 and SN 355. SKK 140 articulated jib on the same NA sheets. Lift to the serial chart in the cab.
- DOCUMENT
- GOSPEL-CRN-024
- REVISION
- 01 CURRENT
- EFFECTIVE
- 2026-09-01
- OWNER
- GOSPEL Safety
- APPROVED BY
- GOSPEL
- REVIEW
- 2027-09-01
Lift to the serial chart in the cab — this jib, this reeving, this mast, this ballast. The files below are Morrow published Pecco / Peiner range sheets. Peiner built them. Pecco was the North American name. Terex took Peiner in 1998. Current Terex SK hammerheads sit under Raimondi. Serial operator and maintenance manuals live in the cab.
PUBLISHED RANGE
SN 160-16
16 t (35,300 lb) max. 50 m (164 ft) jib. 2,585 kg (5,700 lb) at max radius. Morrow sheet names the serials it covers.
SN 355-8/16
16 t (35,300 lb) max. 60 m (197 ft) jib. 3,490 kg (7,700 lb) at max radius.
SKK 140
Articulated jib. 12.5 t (27,600 lb) max. 50 m (164 ft). 3 t (6,600 lb) at max radius.
LOAD CHARTS + DATA SHEETS
SN 160-16 — MORROW RANGE SHEET →
Covers the serials named on that PDF. Serial chart in the cab wins.
MANUALS + MAINTENANCE
MORROW DATASHEETS — PECCO / PEINER →
Rope luffing: luffing rope, cathead, luffing winch. SKK: articulated knuckle. The serial manual names the interval.
INSPECT
- Serial, jib length, reeving, counterweight and mast match the chart in the cab
- Jib angle against the chart for this radius and this reeving
- Out-of-service / weathervane radius for this jib length
- Rope SN: luffing rope, cathead sheaves, luffing winch, dead ends
- SKK articulated: knuckle pins, keepers, geometry
- Hoist rope, hook, limits, overload, anemometer
- Slew, mast, ties, access
MAINTAIN
- Luffing system on the OEM interval for this serial
- Hoist and slew as the lubrication chart
- Wire rope: hoist and the luffing line
- Structure: jib, cathead, mast. SKK knuckle if fitted
GOSPEL FORMS
LUFFING JIB INSPECTION — GOSPEL-FRM-028 →
TOWER PRE-USE — GOSPEL-FRM-027 →
PROVENsin(). Current version on this site.