JASO · LUFFING JIB
JASO LUFFING
PA rope luffers. Same job: a jib that luffs so the crane can work tight to the building. Match the machine on site to the right chart.
- DOCUMENT
- GOSPEL-CRN-022
- REVISION
- 01 CURRENT
- EFFECTIVE
- 2026-09-01
- OWNER
- GOSPEL Safety
- APPROVED BY
- GOSPEL
- REVIEW
- 2027-09-01
Lift to the serial chart in the cab — this jib, this reeving, this mast, this ballast. The files below are JASO published technical sheets from the English tower site. EN 14439 C25 and FEM 1001. Serial operator and maintenance manuals live in the cab. Smartlink and Eco Mode where fitted.
PUBLISHED RANGE
HPA hydraulic
J118HPA, J168HPA, J198HPA. See GOSPEL-CRN-021.
J138PA.A
8 t (17,600 lb) max. 45 m (148 ft) jib. 2.25 t (5,000 lb) at max radius.
J208PA / J265PA
18 t max. 60 m jib. 1.7 t at tip on the 208. 2.2 t on the 265.
Heavier PA
J280PA through J780PA on the English luffing listing. J780PA: 75 t, 70 m, 5.7 t at tip. Match the plate to that sheet.
LOAD CHARTS + DATA SHEETS
MANUALS + MAINTENANCE
Rope PA: luffing rope, cathead, luffing winch. Hydraulic HPA: ram and tank. The serial manual names the interval.
INSPECT
- Which luffer: hydraulic HPA or rope PA. Inspection follows that machine
- Jib angle against the chart for this radius and this reeving
- Out-of-service / weathervane radius for this jib length
- Rope PA: luffing rope, cathead sheaves, luffing winch, dead ends
- Hydraulic HPA: ram, hoses, tank, pins — see GOSPEL-CRN-021
- Hoist rope, hook, limits, overload, anemometer
- Slew, mast, ties, access. Same sections as the flat-top pack
MAINTAIN
- Luffing system on the OEM interval for this serial
- Hoist and slew as the lubrication chart
- Wire rope: hoist and, on rope luffers, the luffing line
- Structure: jib, cathead or ram attachments, mast
GOSPEL FORMS
LUFFING JIB INSPECTION — GOSPEL-FRM-028 →
PROVENsin(). Current version on this site.